The L2 Indicator is a high performance and rugged instrument designed for any type of Load Testing Machine application, to operate under any type of conditions. It is specifically designed for motorized machines.
It measures the Force in compression (positive values) as well as tension (negative values). Similarly, the Position display is of incremental type, so that the reference zero position is of floating type, and any value relative to that position is displayed (positive in one direction and negative in opposite direction).
Apart from showing direct Force and Position values on its dual displays,
it has got many other features such as
Full software calibration
Flashing Displays when value crosses 90% of Full Scale
Peak Force and Spring Rate displays (optional)
Data collection of up to 12 steps at a time, with preset step width, with force or position as the base parameter
Provision for RS232 output of the data, with option for selecting either continuous data transmission or transmission of collected data
GENERAL TECHNICAL SPECIFICATIONS:
Load cell excitation - ± 5V DC
Input signal range - 0 to 20 mV
Internal resolution - 20,000 counts or 40,000 counts
Non- linearity - +0.05 % of F.S.
Operating temperature range - 0 °C to +50 °C
Storage temperature range - 10 °C to +70 ° C
Operating voltage - 230 VAC ±10% 50 Hz
Calibration Full digital software calibration through keyboard
Settings Set Points, Digital Filter, Baud Rate and Data Collection Settings by software
Displays 5 digit 7 segment LED 12.7mm with negative sign, 1 each for Force and Position Visual Indications (with LEDs) Overload Alarm, Peak Force, Set Points, Data Collection in progress, Data Collection Over Audio Indication (with buzzer) Force Overload
Housing type and size Table Top Mounting with Tilt Stand, 144 mm x 144 mm x 250 mm